learn more

The little buck loader uses high quality steel construction, and updated welding equipment to provide superior rigidity and strength. 

The Easy Grease system is fitted to every little buck loader. This allows the operator to
grease the loader safely and quickly.

The Little Buck Loader utilizes hardened pins in steel bushings, providing longer life and increased strength.

The spring-loaded cam-over attachment plate allows the operator to attach and detach the loader alone in less than 5 minutes, with quick connect hydraulic inserts and without any tools. There are no brackets to pre-attach, and the loader is tested and ready to use immediately. The mowing deck can remain mounted and function on every tractor model. It easily stores in under 18 square ft.

Breakout force @ ground level, pivot point  / 420 lbs
Lift capacity to full height @ pivot pins  / 340  lbs
Maximum lift height @ pivot pins /  5' 9"
Digging depth below grade with level bucket /   2 in
Bucket size  / 48" wide
Bucket volume  / 4 sq ft. (without mounding)
Lift cylinder / 3” x 12”
Dump cylinder / 2” x 8”
Shipping weight  / 220 lbs


"Steve, just wanted to send you a quick note on the loader. I LOVE IT! I have about 10 hours of use on it already and it works great. I’m prepping a site for a 15x42 building that is on 6x6 skids with a wood floor so I wanted the water to drain away. I dug out a 19x46 area about 3-4” deep and then yesterday had 23 ton of 1” washed granite hauled in and spread it out and leveled it with the loader. Everything went real well and I couldn’t be happier."
-Jerry on August 28, 2015

"I purchased your loader recently and it works great, have found multiple uses for it. Found the pick up was only limited by weight on tractor. I have a 720 with wheel weights and I weigh 180, had a rock in bucket and it easily picked, but tires were barely touching ground."
-Dan on May 6, 2015

No comments:

Post a Comment